TAMS 4.0.0.10 CHANGES: --------------------------------------------------------------- * Changed settings screen to allow for scrolling if too many entries * Added "note" function for road segments * Added labels * Changed road information to left aligned to improve typing experience * Changed width & lengths from fixed decimal "double" to self-adjusting "decimal" numbers KNOWN BUGS: --------------------------------------------------------------- * Labels are poorly positioned and have too many duplicates. * No option to disable labels (for slow computers). * Add reminder to save if de-selecting modified segment? * History button was enabled, but does nothing. (Disabled for now) * Multi-selection save is problematic. Suggested to only save one segment at at time. * Saving new information to multiple segments will wipe any previous values for those segments; even if you leave entries blank. (Should only overwrite entries that are not blank.) * Speed limit and lanes (other?) are set to 0 on multi-save (with blank value) * Missing descriptions on settings page. * Can't change data entry date * Blank settings dialog will still open from menu if there are no available settings. * Map segments not shaded according to RSL * Installing updates *may* reset settings (mostly most recent project will be blank). * Missing unpaved & concrete distress images, descriptions * Asphalt Distress desception corrections/improvements: Drainage doesn’t show the difference between each distress grade. Transverse distances between cracks should be >100’, >20’, and <20’. Fatigue extent should be 1 and 2 full length cracks and then 30% of surface area for the third category.